Five Maintenance Steps of Hammer Crusher

VIPEAK production of hammer crusher is mainly broken materials as coal, salt , chalk , gypsum , brick , limestone , broken fiber structure, strong flexibility and toughness of broken wood , paper or broken asbestos cement waste such as asbestos fibers can also be recycled and so on.

Know the versatility of hammer crusher , the following VIPEAK told you about the hammer crusher maintenance of five steps:

First, ring hammer crusher is responsible for bearing the entire load of the machine, so good lubrication of the bearing life of the crusher have a great relationship, it will directly affect our life and the operation rate of the machine, So , when we ring hammer crusher to inject lubricant , lubricant requirements have to clean and seal system requirements must be good crusher , Henan Zhenping Xinlong Machinery ring hammer crusher main oiling Office : 1, two rotary bearing , roller bearing 3 , all of the gears 4, the movable bearing , the sliding plane.

Second, if it is a new installation of ring hammer crusher , its tires are prone to loosening, so we must always be checked and, if encountered loosening, tightening well before the need to continue to use .

Third, when the operation of the machine , you need to pay attention to is whether the work of the various parts of the machine is functioning properly working , if found irregularities , the need to find relevant staff .

Fourth , it should be noted that the individual wear parts , should always check the degree of wear of these parts , if necessary, have to be ready to replace worn parts .

Fifth, put the base of the plane of the active device , you should need to remove dust , etc. The aim is to avoid crushing machine when the material can not be met , activities, bearing chassis movement can not cause serious accidents.

hammer crusher:http://www.mill-crushers.com/Stone_Crushing/Hammer_crusher.html