Adjust Concrete Mixer in Concrete Batching Plant

After finishing concrete batching plant installation, adjust the position of sensor ring, check if the operation state of weighing hopper is normal, by the running test without loads, observe if the running direction of electric roller is right Concrete Batching Plants, or else, change running direction, after motor phase sequence is right, please adjust the bolt of electric roller, if the rear runs off the track, please adjust the rear lead screw. Adjustment method: If veering to the right, adjust the right end of head roller forward, at the rear, straining the right lead screw of rear roller backward and vice versa.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:Reversing drum concrete mixer,SICOMA Twin Spiral Shaft Concrete Mixer,water well drilling rigs,etc. We will provide you with the best product and service.

2. Mixing arm adjustment of concrete batching plant: Please keep the distance between and mixing blade and lining plate to achieve the best mixing effect , in general, the clearance between blade and lining plate is 4~6mm, if more than 10mm, please adjust the clearance , before adjusting, you must cut off the power supply to avoid the accident.

Discharging door sealing adjustment of belt conveyor concrete batching plant: The clearance between discharging door is 2mm. if the clearance is too big, it will cause the mixture leakage, if the clearance is too small, open the door hard concrete batching mixing plant price,if appear the above phenomenon, please adjust the seat cushion thickness of bearing of discharging door.

concrete batching plant:http://www.daswellmachinery.com/

concrete mixer:http://www.dwdieselmixer.com/

batching plant:http://www.daswellchina.com/products/concrete-batchingplants/ready-mixed-concrete-mixing-plant.html

Concrete Batching...