Solid Control Drilling Mud System in Addition to Drilling Mud Cleaner

http://www.shale-shakers.com/solids-control-equipment/vacuum-degasser.html

Vacuum Degassers for Sale

Solids control equipment is a general term, according to our different needs, we can choose a different machine, and today we look at it Drilling Fluids Desander now.Let us talk about its composition it, it was made out of the tube and the cyclone components. By cyclone shelters, cone, Desander Hydrocyclone through lower flange, clamp connection for one, the bottom of a flower hat low-flow exhaust sand mouth.

Cyclone overflow pipe and inlet pipe, outlet pipe clamp fastened by China Uni com. Bottom orifice is adjustable, Desander Hydrocyclone can be properly adjusted according sand content of drilling fluid replacement level. When adjusting the bottom orifice, simply unscrew adjusting to spend under the cap, after the replacement of sand underflow discharge port, then you can adjust the screw on the flower hat. Desander Hydrocyclone are provided on both sides of the inlet, the choice of one, the other covered with a blind flange closure.

That is how it performed work? It is within the scope of the drilling fluid pressure, through the inlet tube, the mud along the inner wall of the Vacuum Degassers for Sale inlet tangentially into the cyclone body and a cylindrical downward spiral rotation speed, the centrifugal force field generated great, light from the center of the drilling fluid spiraling low pressure area, circulating the drilling fluid from the overflow port is discharged into the Oilfield Mud Conditioner, the heavier solid particles being left under the action of centrifugal force to the tube wall, and under the thrust of its own weight down the rotation of the drilling fluid along the cyclone the walls of the spiral sink, discharge and Drilling Mud Centrifuge flow to the screen surface from the bottom orifice, through vibration sieve screening, drilling fluids and solid particles have been isolated, purified and thus play a role in the drilling...