Vertical Cutting Dryer Managing Oil-Based Drill Cuttings

At present, zero waste discharge still remains a bit away after going through the previous four steps, therefore solidification, thermal desorption, cuttings reinjection and biodegradation will be utilized to push towards the goal as the last step. Hi-G dryer: KOSUN Hi-G Dryer can recover water- and oil-based mud in drill cuttings with fluid phase down below 10% and remarkable reduction on waste discharge cost. It is especially good at managing oil-based drill cuttings.

http://www.china-kosun.com/kosun-solids-control-equipment/decanter-centrifuge.html

The ES-KSN oilfield drilling vertical centrifuge returns and recycles large percentages of SBM (Synthetic Base Mud) and OBM (Oil Base Mud) to an active system which in the past was lost as waste products to the environment. ES-KSN oilfield vertical cutting dryer can reduce total discharged OOC below 6%, which is currently the discharge limit in many areas of the world, in many areas of the world, our goal is 5% total OBM discharge to the environment, and our goal is not only to reach 5%,but also reduce the percentage further.

Features & Benefits of ES-KSN Oil Drilling Waste Management Vertical Centrifuge:

1. Highly effective liquids/solids separation minimizes fluids content of cuttings, reduce waste-disposal volumes.

2. Effective separation reclaim high percentages of fluids that can be reused in the active mud system, recovers whole mud lost from shaker failure, rig motion and screen blinding.

3. Normal wear parts are easily accessible from the top of the unit; belt is easily changed without removing assembly.

4. Interchangeable tungsten-carbide rotor blades and gear box from excessive erosion, minimizing main components failure.

http://www.kosunservices.com/drilling_waste_management/vertical_centrifuge.html