Jaw Crusher Operation, Operate Jaw Crusher Instruction, Specification

Jawzenith load test

(1) jaw crusher two hours continuous operation, bearing temperature have to not exceed 30 .

(2) All fasteners need to be firm, without having loosening

(3) flywheel, grooved wheel operating smoothly.

(four) All components of friction without having abrasion, debris and grinding out the phenomenon, no unusual sound.

(five) The nesting population on the adjustment device really should have the ability to guarantee that nesting population adjustment range.

two. Jawzenith load test

(1) can not possess a cyclical or significant impact of a crash.

(2) Maximum feed size should be consistent with design specifications.

(3) steady operation 8h, bearing temperature rise shall not exceed 30 .

(four) The Crusher processing capacity and product size should really meet the style requirements

(five) adjusting the seat and rack ears no major Zama ran.

three. prior to use

(1) doublezenith verify regardless of whether a good lubrication of bearings, thrust plate connections have sufficient grease.

(2) Very carefully verify all fasteners is fastened.

(three) Cautiously examine the belt is great. If located to possess broken the phenomenon should be promptly replaced, once the transmission belt or the pulley there exists oil, the application of oil rag and wipe.

(4) Verify the protection device is effectively and found that insecurity need to be instantly removed.

(5) Check no matter whether the ore crushing cavity or debris, if ore or debris, then should be cleaned to make sure that the crusher cavity begin.

(six) Check no matter whether the return in the prime bolts, gaskets group is pressed, Tzenith bolt is tightened.

Jaw crusher get started

(1) The examination proved that the standard circumstance in all parts on the machine ahead of starting.

(2) The jaw crusher is only permitted in situation of nozenith load beginning.

(three), starting just before, we will have to use ring tones or signals...