Technology of Corn Feed Granulating Production

Corn Feed Granulating Production line can process big or small particle size of feed and is an advanced, mature and perfect comprehensive production line.

The material receiving and cleaning section（clean and remove the hemp rope and scrap iron from the corn, wheat or bean pulp and then the granular material enters into smashing section）.

Feeding hopper is made of A3 board with 3mm thickness；

Feeding inlet has independent pulse dust collector, and adopts reliable solenoid electric valve；

Distributor position has position indication on the whole screen and has electromechanical double locking device；

Pneumatic and manual valve has leakage-proof function, and there has signal indication for working statement on the control screen.

The elevator cylinder adopts cold-roll steel sheets with thickness of 2mm which is molded by occlusion for one time, and adopts plastic winnowing pan; the nose discharging part adopts wear-resisting subcrust; the conveying belt adopts strong belt; install anti-explosion port on the top; it has two inspection window and maintenance entrance.

Smashing section (crush corn, wheat or bean pulp into powdery material with the required fineness)

According to the products species and technological consideration, choose 1 set of 30KW drop shape hammer crusher；

The feeding device adopts frequency converting control, and its capacity is not less than 5 tons/hour；

The crusher shaft has two sets of hammer installation shafts with different intervals and makes it have the basic micro powder ability；

The crusher should have quakeproof electric appliance protector. The scene should have emergency stop control box；

The screw conveyer blade thickness is 3mm above, the outside shell thickness is 4mm, and the screw conveyer cover board should adopt strict sealing measures to prevent production decline caused by air leak；

All the elevators are super-speed bucket elevator.

Mixing section（mix the multi species of raw material together and stir...