Safety Operation Specification for the Blender

1 meter, accurate and reliable signal signal, electric mixer, rubber board or dry board. Transmission mechanism, working device, brake and so on, all should be fastened and reliable, ensure normal work.Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:Continuous concrete batching plants,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. 2 running empty, check the stirring barrel or the direction of rotation of the stirring vane, confirm the operation, brake, each working device can work normally. When the hopper is raised, it is forbidden to work or walk through it. Material pit bottom to be located in the hopper of the pillow pad SICOMA Twin Shaft Compulsory Concrete Cement Mixer, cleaning material pit must be the hopper with the chain buckle. 3, feed, will be prohibited between head or hand into the hopper and the frame, not by hand or tool material running into the stirring barrel and discharging. Aggregate size should be consistent with the performance of the mixer, beyond the scope of the permit shall not be used. 4, operations, such as the failure can not continue to operate, should immediately cut off the power self loading concrete mixer, the concrete in the mixing tube to remove the clean 5, the mixing barrel of the mixer should be carried out in the operation; adding new material must be the original of the mixer before the concrete can be discharged. Not to stop or start the mixer at full load, except for the material. 6 Electric Mobile Brick Making Machine, after the operation, will be timely machine, water tank, pipeline material, water discharge, cleaning and maintenance of machinery, clean up the work site, cut off the power, to lock the switch box. After the operation, to conduct a comprehensive cleaning mixer, the operator to enter the cylinder cleaning,...