Equipo de Perforación Top Hammer

Technical Specification 09515-1 2009-02-02

Sandvik DP1500 Surface Top Hammer Drills

Sandvik DP1500 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer. DP1500 is designed for efficient production drilling in large quarries or open pit mines and construction work sites. It suits well also for wall control and development works. To customize the rig it can be equipped with a variety of options to meet special requirements.

Hole Diameter: Rock Tools: Rock Drill: Engine Output: Flushing Air: Production Capacity: Total Weight

89 - 150 mm (3 ½” - 6”) 51 and 60 mm ( 2” and 2 3/8” ) rods 28 kW 261 kW 14 m3/min, up to 10 bar 2,0 Mt/year 19 200 kg

© 2009 Sandvik Mining and Construction

1/4

Technical Specification 09515-1 2009-02-02

Sandvik DP1500

POWERPACK

Engine type Number of cylinders Engine output Transmission type Hydraulic pumps Screw compressor type Flushing Air capacity Flushing air pressure Air cleaner Fuel tank Weight Caterpillar C 11 6 261 kW/2 100 rpm Gear box 2 Variable/gear Enduro 25 14 m3/min up to 10 bar 2 pcs, dry type with ejector and safety element 520 l 1 450 kg HL 1560T 51, 60 mm 76, 87 mm 90 - 180 bar 30 - 40 Hz 28 kW 2 050 Nm Air / oil mist Air 470 kg

HYDRAULIC ROCK DRILL

Rock drill type Drill rod diameters Drill tube diameters Operating pressure Percussion rate Percussion output power Maximum rotation torque Shank lubrication Flushing Weight

FEED

Feed type Length of feed Rock drill travel Max. length of starter rod Feed/pull out force Retaining centralizer Feed extension travel Feed swing Feed tilt Weight * W/o hose reel LF 1514, cylinder 8 025 mm 5 580 mm* 6 100 mm (20')* 36 kN Pito 15H 1 480 mm -56/+52° (-20/+94°) 11 - 133° 1 360 kg

HYDRAULIC SYSTEM

Filtration rate Cooling capacity Hydraulic oil tank Shank lubrication device 12 micron abs. up to +50°C ambient 420 l SLU 18-1

CONTROL SYSTEM

Type Collaring system Antijamming system Voltage...